I am moving and selling my engine machine shop. Mike's Engine Machine Shop located 105 W. Front Street  Uvalde, TX 78801. It is 75 miles west of San Antonio. I have owned it for ten years and bought it from a gentleman that ran it for 40 years.  It is a well established shop and customer base that reaches 75 miles in every direction. This is the only engine machine shop in this area. It is a big agricultural and trucking area. I spend most of the year two to three months backlogged. Shop size is 30' X 72' steel building with insulation and an additional 40' shipping container used for storage. Lot size is .3916 Acre with paved roads on three sides and alley on fourth. I am asking $175,000.00 but willing to negotiate. If not sold in four months, will list machinery and parts for sale. Phone number is 1-830-278-6944  Mike.

Machinery includes:

Storm Vulcan Mattoni SVM7500 Flywheel Grinder w/ tooling and diamond stone.

Winona Van Norman RV12 seat & guide machine with tooling.

Crankshaft Polisher w/ stand.

Kwik-Way FN Boring Bar w/ tooling and a single cylinder boring stand.

Kwik-Way SVS-D Valve Facer.

Kwik-Way SGH seat grinding motor.

Set of pilots .437" top. Size range from 5mm up to 9/16".

Shop made Cylinder Power Hone.

Storm Vulcan Mattoni SVM55 Jet Clean 21" X 32".

Trinco Dry Blast Model 42X24SL/BP.

Peterson Head & Block Surface Grinder Model 1054.

Purvis Parts Tumbler.

Durabond Cam Bearing Install/ Remove Set.

Sunnen Dual Rod heater Model CRH-50K.

Sunnen Heavy Duty Cap & Rod Grinder Model CRG-750.

Sunnen Rod Honing Machine model LBB-1699  w/ Extra Cabinet and Full Set of tooling.

Sunnen AG-300 Precision Gauge.

Sunnen Rod Twist/ bend checking Stand.

Ingersol-Rand Air Compressor 80 gallon

Assorted parts- Cam Bearings, Ring Sets, Pistons, Valves, Seats, Guides.

40' Shipping Container completely full with assorted heads, blocks, cranks. SBC, BBC, SBF, BBF, Chry.