AERA FORUM » Buick 3.8 Torque/Honing Plate

rcull · 12/18/2015 10:28 am

I want a honing plate for a 1985-87 Buick 3.8, approximate dimensions are:
Bore would be 3.8"+, with a bore spacing of about 4.250. Bolts would be about 4.250 x 3.100. Dimensions measured with my caliper.

Dave Conway · 12/19/2015 12:04 am

Contact CCA Racing.
They do custom plates and they are very reasonable in price.
They are complete with spacers for studs or bolts. ask when you order

Dave

rcull · 12/19/2015 10:15 pm

Thank you for the suggestion, I have emailed them.
I have found what I believe to be a Buick Stage II torque plate. It has a 14 bolt pattern. I suspect that it should fit the 3.8 using the 8 bolts. Can someone confirm this?

Dave Conway · 12/21/2015 3:20 am

You can do a Google search for use Sunnen equipment dealers lt should show many with T/plates available
Jamison equip.has a bunch available as wll as Farris equipment/
They have toll free numbers that work from Canada but don't call late in the day.
They will respond to emails quickly. I deal with both of them all the time
Good luck in the search

Dave

Dave Conway · 12/21/2015 3:21 am

You can also try posting on Speed Talk
There is a ton of guys with stuff available there as well

Dave

Index
» Equipment Wanted
» Buick 3.8 Torque/Honing Plate

12/18/2015 10:28 am #1

Buick 3.8 Torque/Honing Plate

12/19/2015 12:04 am #2

Re: Buick 3.8 Torque/Honing Plate

12/19/2015 10:15 pm #3

Re: Buick 3.8 Torque/Honing Plate

12/21/2015 3:20 am #4

Re: Buick 3.8 Torque/Honing Plate

12/21/2015 3:21 am #5

Re: Buick 3.8 Torque/Honing Plate

Index
» Equipment Wanted
» Buick 3.8 Torque/Honing Plate

Board footera