AOK Engines of Motley, MN is Moving and Downsizing.  The following equipment is for sale and under power for your review.  Please contact Arnie at 1-218-575-2755 with any questions. Phone Calls only!

• Winona Van Norman Flywheel Grinder with diamond stone- $3500.00

• Rogers Machine Company Belt Sander, model RMC 700- $1000.00

• Winona Van Norman Jet Spray Washer- 3 phase electric heat , Model JW24, 24" turntable x39" tall-$2000.00

• Quik Way Jet Spray Washer- 3 phase electric heat, 26" turntablex 40" tall- $2000.00

• Sioux Valve Grinder, Model 685, with Van Norman Cabinet-$1800.00

• Sioux Seat Grinder, Like New- $1000.00

• FS120 Super Flow Bench, with Flow Com, andextras- $3000.00

• Tobin Arp Glass Bead Blaster, Model KB- $1000.00

• Kamas Kleen E-Z Parts Washer- $150.00

• Tobin Arp Line Bore Machine, Model TA 15, Well tooled- $2500.00

• Amco Brake Drum and Rotor Lathe, Like New- $1200.00

• Coffing Chain Hoist- 3 phase, 2 Ton- $400.00

• Budgit Chain Hoist- 3 phase, 1/2 Ton- $500.00

• JMT 360 Lathe 14" x 40" with tooling- $4500.00

• Kondia Mill 9" x 42" with an 8" Head spacer- $3800.00

• Van Norman Crankshaft Grinder, Model 465, 18" x 60", includes 6 wheels and 4 hubs, Rebuilt in 2003, Scraped and new bearings, less than 500 cranks ground since rebuilt- $6800.00

• Lemco Crankshaft Press, Model 533- $600.00

• Kansas Instruments Magna-Flux Machine, Model PAX 7500- $2800.00

• Van Norman Balance Technology Crank Balancer with Air Float Drilling Platform, scale and Bob weights for V8 and V6, flywheel mandrel, Model AD500LR- $10,000.00

• Sunnen Heat Brake and Shot Blaster, Model BSC2538CD- $16,000.00

• BHJ Lifter True, fixtures included; BB, SB, MPB, MSP, FO/SOV- $500.00

• Torque Plates: BB, SB, 2.5 Chevy, some Fords- $125.00 each

• Contour Probe DA-400, Powder Flux Magnetic Particle Inspection Tool- $500.00

• 1/2 ton Jib Crane- 360 degree swing, 12' Boom, 10' under beam- $1400.00

• 1/2 Ton Jib Crane- 180 degree swing, 10' Boom, 10' under beam- $1200.00

• 1/2 ton Jib Crane- 180 degree swing, 10' Boom, 10' under beam- $1000.00

• 2 Engine Stands- $50.00 each

• Approximately 100 Chevy Cylinder Heads cleaned and mag- $25.00 each

• Chevy Small Blocks cleaned and mag- $100.00 each

• Misc. Ford Blocks- $100.00

• Storm Vulcan Parts Washer, 26" Turntablex 35" tall- 3 Phase, gas fired- $700.00, not under power at this time.