AERA FORUM » Rottler Equipment

Ahebert · 10/15/2019 5:31 am

Does any body know who manufactured the level for the older SG80A machines? Need to find another one, Rottler has a level but i would need to upgrade the computer so the level would cost me 35,000.

Dave Conway · 10/16/2019 10:17 am

Hi Archie
Some of that stuff is from india I believe.No telling who made it for them but for sure they won't say or hint to its origin.
Ed keibler may be a good contact for that if you can find him. he is on speed talk so thats an option.
You may want to join and post up on there as there is way more talented traffic that can help. Lots of tech knowledge in this area there as well.
Can you just use a digital level and adjust it manually side to side?
I have seen some electronic levels offered by Sunnen for indexing the guide center line which me work.
If it has to go through a computer there has to be some way to crack it open to figure it out.
can you still use the machine without the level??
If so I have some info on manual set digital levels I can send you.

Let me know

Dave C

Dave Conway · 10/16/2019 10:23 am

I put this over on STI will let you know what come up there.
I will try to post a link to if after I get some replys for you to follow up with.

Dave Conway · 10/18/2019 6:54 pm

Het Archie
Do you have a pic ypu can post or send me??
I may have found something for you but need a pic to confirm its the same application.

Dave C

Ahebert · 10/28/2019 10:37 am

Dave Conway wrote:
Het Archie
Do you have a pic ypu can post or send me??
I may have found something for you but need a pic to confirm its the same application.

Dave C

Thanks Dave i found out Robin in India is the supplier for the parts for those machines

Dave Conway · 10/29/2019 1:07 pm

Is there any way you can send me a picture of your level?

Dave Conway · 11/08/2019 4:18 pm

Here's a link for anyone else with the issue of a replacement.

https://www.mouser.com/catalog/specsheets/TE_11192018_ENG_DS_AngleStar_Clinometer_A1.pdf

Hope that helps

Dave

Index
» General Discussion
» Rottler Equipment

10/15/2019 5:31 am #1

Rottler Equipment

10/16/2019 10:17 am #2

Re: Rottler Equipment

10/16/2019 10:23 am #3

Re: Rottler Equipment

10/18/2019 6:54 pm #4

Re: Rottler Equipment

10/28/2019 10:37 am #5

Re: Rottler Equipment

Dave Conway wrote:

10/29/2019 1:07 pm #6

Re: Rottler Equipment

11/08/2019 4:18 pm #7

Re: Rottler Equipment

Index
» General Discussion
» Rottler Equipment

Board footera