You are not logged in. Would you like to login or register?



6/06/2019 8:32 pm  #1


CBN/PCD Cylinder Head Surfacer Wanted - Las Vegas

I'm reopening my Machine Shop in Henderson,NV and im looking to retool and upgrade some of my equipment.
Im Looking for:
CBN/PCD Resurfacer 
3 Angle tooling ie: Sgm 500 .375 pilot
Cylinder Head Pressure Testing Setup
Neway Power Drive Unit

Im also looking for a source for custom printed Cylinder Head Bags

Thanks,
Joshua Villasenor
702-217-4750
gotspeedracing@yahoo.com

 

6/09/2019 2:16 pm  #2


Re: CBN/PCD Cylinder Head Surfacer Wanted - Las Vegas

I have a Neway drive unit w/ track  . also have a CBN boring surfacing machine VB320 80 inch table travle

 

Board footera

 

Powered by Boardhost. Create a Free Forum

ADDITIONAL INSTRUCTIONS FOR ADDING PHOTOS: To add a photo to your forum post, you must use a link to an image hosted elsewhere. (1) Create a free account on an image hosting website of your choice; we recommend www.imgur.com. (2) Upload your photo and then copy the image link (http://www.example.com) from the image hosting website. (3) Paste the image link into your post using the image tool on the forum. If you have any questions, please email info@aera.org.