1 of 1- Internationalautomotive
- New member
Offline
GM 7.4 454 Gen 6 Roller Cams
Good morning. I have over 50 brand new cams I would like to sell. I believe they are Compcams. They are not in original boxes and only have the following marking on them.
2296
4364
417018
Any interest please message me. Thank you.
- Dave Conway
- Member
Offline
Re: GM 7.4 454 Gen 6 Roller Cams
WITH OR WITH OUT FUEL PUMP LOBES???
IF THEY ARE COMP THEY WILL HAVE A GRIND NUMBER ETCHED IN THE END OF THE CAM BARREL.
WHERE ARE THESE NUMBERS LOCATED ON THE CAMS YOU HAVE.
CAN YOU PROVIDE PIC'S??
Pro Power Engine & Machine
Victoria BC Canada
www.propowerengines.ca
Thread Starter- Dave Conway
- Member
Offline
Re: GM 7.4 454 Gen 6 Roller Cams
NO FUEL PUMP LOBE Visable
The ID numbers are not COMP CAMS they do however translate to stock OEM 454 roller cam from late 90's FI 454 PU truck application which are very low lift and definitely not HP cams.
They are suitable for regrinding but the hardness is not very deep into the lobes even though they are steel cores
Thanks for getting back to me
Dave
Pro Power Engine & Machine
Victoria BC Canada
www.propowerengines.ca
