You are not logged in. Would you like to login or register?



12/18/2015 10:28 am  #1


Buick 3.8 Torque/Honing Plate

I want a honing plate for a 1985-87 Buick 3.8, approximate dimensions are:
Bore would be 3.8"+, with a bore spacing of about 4.250. Bolts would be about 4.250 x 3.100. Dimensions measured with my caliper.
 

 

12/19/2015 12:04 am  #2


Re: Buick 3.8 Torque/Honing Plate

Contact CCA Racing.
They do custom plates and they are very reasonable in price.
They are complete with spacers for studs or bolts. ask when you order

Dave


Pro Power Engine & Machine
Victoria BC Canada
www.propowerengines.ca
 

12/19/2015 10:15 pm  #3


Re: Buick 3.8 Torque/Honing Plate

Thank you for the suggestion, I have emailed them.
I have found what I believe to be a Buick Stage II torque plate. It has a 14 bolt pattern. I suspect that it should fit the 3.8 using the 8 bolts. Can someone confirm this?

     Thread Starter
 

12/21/2015 3:20 am  #4


Re: Buick 3.8 Torque/Honing Plate

You can do a Google search for use Sunnen equipment dealers lt should show many with T/plates available
Jamison equip.has a bunch available as wll as Farris equipment/
They have toll free numbers that work from Canada but don't call late in the day.
They will respond to emails quickly. I deal with both of them all the time
Good luck in the search

Dave


Pro Power Engine & Machine
Victoria BC Canada
www.propowerengines.ca
 

12/21/2015 3:21 am  #5


Re: Buick 3.8 Torque/Honing Plate

You can also try posting on Speed Talk
There is a ton of guys with stuff available there as well


Dave


Pro Power Engine & Machine
Victoria BC Canada
www.propowerengines.ca
 

Board footera

 

Powered by Boardhost. Create a Free Forum


ADDITIONAL INSTRUCTIONS FOR ADDING PHOTOS: To add a photo to your forum post, you must use a link to an image hosted elsewhere. (1) Create a free account on an image hosting website of your choice; we recommend www.imgur.com. (2) Upload your photo and then copy the image link (http://www.example.com) from the image hosting website. (3) Paste the image link into your post using the image tool on the forum. If you have any questions, please email info@aera.org.