You are not logged in. Would you like to login or register?



9/14/2018 10:44 am  #1


New LED UVA magnaflux lights- Feedback

Anyone have experience with EV6000  LED UV inspection light from Magnaflux.  We use a spectroline BIB150 assembly and the bulbs are discontinued.  Just wonder if the LED assemblies are bright enough for wet inspections.

Randy

 

9/17/2018 11:30 am  #2


Re: New LED UVA magnaflux lights- Feedback

Randy, I've heard from my buddy Chuck that there is significant improvement of crack detection using a LED light. You may even be able to "test" one from the folks at Magnaflux as they want to provide you with the best opportunity to find a crack. Yes, they're expensive but well worth it in the long run.

 

11/21/2018 10:18 am  #3


Re: New LED UVA magnaflux lights- Feedback

Well we bought the LED,  Big difference in lighting, So far very happy with our choice despite the high cost.
 

     Thread Starter
 

Board footera

 

Powered by Boardhost. Create a Free Forum

ADDITIONAL INSTRUCTIONS FOR ADDING PHOTOS: To add a photo to your forum post, you must use a link to an image hosted elsewhere. (1) Create a free account on an image hosting website of your choice; we recommend www.imgur.com. (2) Upload your photo and then copy the image link (http://www.example.com) from the image hosting website. (3) Paste the image link into your post using the image tool on the forum. If you have any questions, please email info@aera.org.